How to Prevent Water Damage?

A water damage from a flood, rainstorm or leaky pipe can be one that could bring much stress and hassle to you and you really want to bring things back to normal at the earliest time possible. If you are dealing with something other than a big incursion, you may want to consider handling the drying and cleaning up all by yourself in order to save time and money.

The only problem is that the cleaning up as well as the recovering from water damage Colorado Springs is not usually as simple as it looks. The following are some of the main things you have to be aware of in addressing water damage from minor clean water incursions:

1. Know What You Are Dealing With

Water damage may be caused by 3 various kinds of water which include black water, gray water and clean water. It is very essential to know the differences since gray and black water poses health risks to your customers and employees and require to be handled in a different manner. The more obvious clean water source would be water from rainwater, steam lines, water heater or even pipe lines. The key rule of thumb is, it should smell and look like a tap water. Recovering from heavy flooding or gray or black water damage involves extra considerations.

2. Make Sure That You Investigate Every Water Damage

The complicated thing about the water damage recovery from something such as rainwater or broken pipe incursion is that you may actually just witness a small portion of the actual water damage. Most of the time, the moisture is usually hidden in walls and it is very crucial to dry and identify all of the areas affected by the damage in order to prevent mold formation.

The ways of dealing with water damage to your walls would depend on the kind of materials being used. Dry wall can usually be saved when you take care of the damage as soon as possible. As a matter of fact, you can buy moisture meters which allow you to check for the integrity of the structure. If the structural integrity checks out therefore, your drying method will just depend on the contents of your wall. If your wall has insulation, you’ll need to utilize flood cuts.

If there’s no insulation, your best approach is actually to make weep holes. And if you are dealing with a firewall, you will want to utilize staggered cuts. Also, you will want to check and pull your flooring materials and base molding. In addition to that if the flooring has carpets, you may want to pull back wet areas and dry them with the use of a fan.

3. Keep Your Windows Closed and Establish Proper Airflow When You Use the Drying Approach

Once you identified any signs of moisture, your instinct would be to open the windows in order to help the process of drying up however, it may also not be recommended.

Leave a Reply

Your email address will not be published. Required fields are marked *